The convenience and advanced features are exceptional in electric bidet seats. Still, many beginners need help with using their bidets. So, are you experiencing the same problem? You already installed the bidet, but it needs a reset. Don’t worry. Read our Troubleshooting guide to reset a bidet.
If you asked how to reset the bidet? It’s simple. First, power cycle or plug/unplug your electric bidet. Now start inspecting the seat sensors, wireless remote, Auxiliary Buttons, and others. You should also mount the seat properly if you see any irregularity.
The fact is, Restarting your bidet seat depends on your problem whether the problem is a low water supply or filling the tank. Similarly, if you face a turn-on problem, inspect the power supply. So, depending on your trouble, reset or adjust your bidet seat. We have covered a complete guide to tackle such issues.
Cases You might Need To Reset Your Bidet?
An electric bidet seat packed with many advanced features. The most common are skin sensors, auto sprayers, auto open lids, warm and cold water facilities, etc. Now the thing is, an electric bidet is a smart device that runs on voltage. So every piece of electronics needs a soft or hard reset after a certain point.
Below are the cases where you might need to reset your bidet.
- If you have bidet seat trouble spraying water
- Automatically start releasing water when you are not there
- Your wireless remote isn’t working properly
- The sensor doesn’t work as on regular days
- Problem to adjust water pressure, temperature, and nozzle angle
- The Bidet seat doesn’t power on
- Your bidet seat needs to be mounted properly
If the issue you are facing belongs to the above list, try to reset your electric bidet.
How to Fix a Bidet Seat – Troubleshoot Guide
We hope you have already checked the cases that demand bidet reset. However, you might to fix other things manually to resolve the issue with your electric toilet seat. Therefore, we have mentioned each thing you need to focus on and the steps need to follow.
1. Hard Reset Your Bidet
Every smart device needs a hard restart after a specific time. It is common for longer use of electronics. Power cycling the devices help to remove the development of any glitch or unwanted errors.
Follow the Below mentioned steps for “how to reset bidet seat”.
- First, unplug the bidet from your wall outlet
- Check for any damage to the cord or power supply
- Wait for approx 30 seconds before plugging in the seat
- Ensure the standard power indicator LED is turned on
- Check the electric outlet if any damage found
- Grab a torch and use a multimeter to ensure the voltage is good
- Remember, north American bidets require a minimum of 110 volts of supply
If nothing suspicious is found in your bidet seat, cord, and power outlet, you may need a technician’s help. However, you can try the following methods.
2. Check Bidet’s Seat Sensors
Every electric bidet seat includes several sensors to automate some processes. The most common are skin sensors, weight indicators, and infrared sensors. Everyone wants these detectors in working condition. If your seat sensors stop performing, inspect them in the following manners.
What type of bidet seat model do you own? Is it Alpha, Bio Bidet, USPA, Clean Sense, or others? Each of these seats includes a skin sensor. Most bidets attach this sensor near the 4-5 o’clock area. Follow the below steps to ensure this detector is working.
- Take a small sheet of toilet paper
- Wet it using water
- Carry the item to your toilet seat
- Stand in front of the toilet, looks down, facing toward the bowel
- Take the wet piece of paper near the skin sensor
- Ensure that the nozzle starts releasing water
- It means the detector is working properly
Some electric bidet seats also include LED indicators for skin sensors.
Weighted Seat Sensor
After the skin sensor, check the quality of your weight detector. To inspect the performance, follow the below steps:
- Keep your seat closed or down
- Using your hands, apply gentle Pressure on the seat
- Try to keep your hand near the left rare hinge
- Ensure if you feel a click
If the weighted seat sensor does not work, you identify it by following the process.
This is an important sensor that is included in most electric bidet seats. Infrared Sensors work as motion detectors to ensure unwanted guests near your toilet. If this sensor doesn’t work, follow the steps below
- Take a small sheet of paper or fold a paper towel
- Bring it near your infrared sensor
- Ensure an alarm or infrared lamps switch on
3. Remote And Button Testing
Now it’s time to inspect the remote and button for your electric bidet seat. First, you should bring a new pair of batteries and insert them into the remote. The next step is to follow the testing phase in the following manner.
- Stand in front of your toilet and point the remote toward your toilet seat
- Start pressing the wash button to ensure the nozzle sprayer comes out and keeps working
- The next step is to check other features like water pressure, nozzle adjustment, and shut-off button
- Now sit on your toilet and ensure the sensors are working
- Test The Auxiliary Buttons that are located at the side of your toilet seat
- Manually check the buttons if they are working properly
If the buttons don’t work even if you sit on the toilet, there may be an installation issue.
Note: – Wireless remote can face trouble if the toilet is far from its range. External objects or walls can also reduce data transmission to your electric bidet.
4 Make Sure Bidet’s Seat Properly Mounted
A properly installed bidet seat is vital to enjoying a hustle-free performance. Does your bidet seat move if you pull it? Does your seat touch or too close to the tank? It’s guaranteed that the seat is not 100% locked. To resolve the problem, follow the steps below.
- Remove the seat completely from the bucket
- Press, hold, and release the lock button
- Slide the bidet a few inches
- Bring the bidet seat back on the bucket
- Avoid touching to placing the seat too close to the toilet tank
- Lose the bolts, adjust the bucket, and hand-tighten the seat
5. You Need Expert’s Help
If resetting the bidet, inspecting the sensor, and adjusting the placement don’t work, you may need experts’ help. There is a 90% chance that your electric bidet will develop a technical issue. So it’s better to contact plumbers to resolve your problem.
How Do I Reset My Bidet Remote?
Unplug the bidet from the power outlet and remove the batteries from the remote. Wait for 10 minutes before powering the items. This soft restart works 90% of the time.
How to Repair Bidet Spray?
Unplug the bidet for 30 seconds and ensure there is no power outage in your area. Now plug in the device and provide the sprayer performance. The process will resolve any internal glitch developed in your bidet.
How Do I Reset My Bio Bidet?
- Start unplugging the bidet from its electric outlet
- Remove batteries from the wireless remote
- Shut off the water supply
- Start your draining process to release all water
- Keep the power supply off for a few hours
- Turn on your water supply
- Plug the bidet and wait for the complete power cycle
- Ensure your bio bidet is working properly or not
Why is My Bidet Not Working?
Several reasons can cause working problems in your bidet. Soft restart or power cycling the device can resolve the issue.
Why is My Bidet Not Flushing?
First, ensure the nozzle doesn’t get stuck in obstacles. If you find it, remove it and keep the bidet on. Now check if your bidet starts flushing normally.
Why is Washing Water Pressure Too Weak?
Clogged water lines primarily cause low water pressure in your bidet. So start removing these obstacles and recheck the performance,
Why Aren’t the Seat and Dryer Warm?
Bidet seats have different eco modes according to brand. Your bidet can save energy by lowering the water, seat, and dryer temperature. Manually adjust the warmth using a remote or control panel.
When Do I Need to Replace Bidet?
On average, a bidet seat lasts 6-9 years. However, cleaning and water pressure performance can become low with age. It happens due to a clogged pipeline underneath the bidet. So you should remove the bidet and clean the water supply every six months.
Remember, technical problems are common with electronic devices. You should timely maintain your bidet to enjoy peak performance. Try power cycling the bidet when you notice a fall in functions like water pressure, nozzle adjustment, or sensor faults, or follow our step-by-step guide to resolve the problem at home.