You turned on the faucet, but nothing came out. It’s an awful scenario that may throw your family’s routine into a loop. The faucets or taps in your sink regulate the water pressure and temperature. Due to constant use, taps might malfunction for a variety of reasons. Therefore, water not coming out of the faucet is a common problem.
In order to get your water running again, you have to figure out what caused it to stop. Since you took care of your power account, there is no longer any chance that the water supply company will shut off your service. Why then? Of course, there could a several reasons behind it. To solve this issue, contacting professional plumbers can be a simple way.
However, being homeowners, we should be aware of all the possible reasons for water not coming out of faucet. So that, in case of emergency you could take action on your own. Therefore, we have compiled all the possible reasons that can be taken care of.
Why is Water Not Coming Out of Faucet?
Problems with the waterline might occasionally be the culprit behind a dysfunctional faucet. Checking the functionality of the house’s other faucets can help you identify whether or not this is the source of the problem. It is also a good idea to contact a couple of your neighbors and inquire as to whether they still have running water.
If no one has flowing water, the problem may lie with the water source or the main waterline. If this is the case, no one has any running water. If this is the case, you should consider contacting the water supplier so that they may investigate the problem on your behalf.
The possibility exists that frozen pipes will stop water from flowing through any of your home’s water sources. This problem might be an isolated incident or impact the main water line that supplies water to your house. If you reside in a region that recently saw temperatures that dropped below zero, this may be the reason why you are having problems with your water supply.
Especially if nobody has been there for a few days and no water has been used in the house. You may use either a heat gun or a hair dryer to defrost the pipes in your plumbing system. However, if you do so, you should exercise extreme caution since the pipes in your home might rupture, resulting in severe flooding.
#Rusted Water Pipes
Rust deposits can form inside old pipes or improperly installed pipes, which can cause rust to accumulate at the faucet. If you have seen water that is orange in color or rust in the area around your faucet, this might be the cause of your faucet not operating correctly.
Rust can also form on the faucet due to normal wear and tear, which can lead to the accumulation of silt that clogs the waterline. If this is the problem, it is strongly suggested that you get in touch with a qualified plumber to resolve the issue correctly.
#Outdated Parts of the Plumbing System
If you live in an older house, your home’s water pipes and other plumbing components may be outdated, worn out, or the wrong size altogether. Older components in the plumbing system might result in decreased water pressure, blocked pipes, or even a complete loss of water supply.
You must check the functionality of all the different water supplies located throughout your property. If several other water sources produce odd noises or are not functioning as they should, the problem may be caused by outdated pipes and plumbing components. In this scenario, you might want to consider contacting a plumber to discuss replacing the pipes and components in your home.
#Faulty Water Valves
The various water valves control the water supply to each water source in your home. Faucets and baths won’t function properly if their respective valves aren’t open or if they develop a malfunction. Checking the valve to see if it is fully open and working correctly is the most reliable technique to establish whether or not this is the source of the problem.
If it isn’t, you’ll need to get in touch with the plumber so that they can give you some advice. In addition, if you reside in an apartment, you should talk to your landlord to find the specific location of the valve associated with your unit.
#Interference With the Spray Nozzle
Does your faucet offer a separate spray nozzle? There is a possibility that the stutter valve on your spray nozzle is jammed, which would prevent water from being redirected to the nozzle. You can determine whether or not this is the cause of the issue by directing the water numerous times through the spray valve.
You can tell that the problem is with the spray nozzle if water is flowing out of the spray nozzle but not the faucet. You may fix the problem by turning off the water in the sink using the cutoff valve. This will stop the flow of water.
To remove the vapor lock, the subsequent step is to activate the spray nozzle and the faucet simultaneously. This will release the vapor lock. Finally, open the valve that controls the shutdown. The water should begin to flow freely from the faucet once more.
Sometimes the water will not come out of the faucet because the tap has become clogged, which may happen at any time. Simply removing the faucet and changing the washer will allow you to fix this problem swiftly. Before attempting to fix your tap, you must first turn off the water flow to it. If you cannot replace the tap washer on your own, you should contact a plumber to complete the task.
#Water Purifier System
It’s possible that the cold water coming out of your faucet is being impeded because a purifier system has an automatic stop mechanism. This takes place when the water pressure is elevated to an unsafe level.
You can manually adjust the water so that it goes around the purifier system; however, this will result in the water not being filtered. Examining the water purification system and the water pressure is the most effective way to locate the source of the problem.
When a water pipe is clogged, the faucet will often either not dispense any water at all or only a very small amount of water. The pipes leading to your water line may be clogged due to silt buildup or other obstacles if you’ve discovered that the water has also stopped working on all of your other water sources.
Lime and deposits of heavy metals can also contribute to choked pipes in their own right. If this is the case, you should contact a plumber as soon as possible to have a video inspection performed so that any obstructions can be located and removed.
How to Fix if Water Not Coming Out of Faucet?
Faucet with Weak Water Pressure
Problems with the aerator are usually to blame when low water pressure is experienced exclusively at one faucet. Hard water or lime can cause sediment to build up in aerators, making them ineffective.
To check if this is the case, run the cold and hot water from every tap in the house at once. A blocked aerator or, less commonly, a clogged faucet cartridge is usually to blame when only one sink has poor water pressure.
The aerator may be unscrewed from the faucet with a twist, cleaned, and reinstalled. However, the faucet must be removed if the cartridge is blocked or broken.
Flow Disruption Caused by Sediment in Water Pipes
Cleaning the water is the quickest and easiest way to eliminate silt from the water lines. The first step in clearing up your pipes is to run cold water through every fixture in your house.
Run the faucets at full blast for around twenty to thirty minutes. If you let the water run, you’ll see that the clarity improves. If not, try again with the same steps.
Plumbers advise clearing out water lines every 18 to 22 months to avoid sediment buildup and potential obstructions.
How do You Reset Water Pump?
If your water pump has lost electricity for any reason, you may find that you need to reset it at some time in the future. An outline of how to execute a reset is provided below. However, there might be some slight changes in the exact process to reset depending on the brand and type. But, the idea for resetting is the same for all. So, lets’ do it.
1. Make Sure the Power Is Off
First, ensure the water pump’s electricity is turned off. This is often positioned in the panel where the circuit breakers are housed. If your switches are not labeled, the switch that controls the pump will typically be found at either the main switch or the switch that controls the bottom part of the home.
2. Take off the Cover
You may remove the cover from your water pump by rotating it to the left and using a screwdriver to pull it up from the edge. This will allow you to remove the cover. Before the cover can be removed from particular water pump lids, the nut used to secure the lid will need to be loosened first.
3. Clean the Exterior
Remove any dead insects, leaves, or other material from the contacts on the pump using a clean rag or an old toothbrush. There may also be other dirt on the contacts. Also, clean any dirt or debris accumulated along the external borders by wiping them down with a damp cloth. In the end, you should check the pressure gauge to confirm that it is working properly.
4. Reconnect the Power
You should reinstall the cap and tighten the nut when cleaning the contacts and the pump lid. After that, you need to turn on the breaker switch so that the water pump may get electricity again.
5. Pull the Pump Lever
The next step is to depress the pump lever and keep it at a 25-degree angle. Repeat this process two more times until you hear a clicking sound. It is important to note that specific pump levers may not produce a sound but will come to a complete halt once they reach the lowest position.
Keep the lever in its current position for about one to two minutes so the water pressure inside the pump can build up. As soon as the mechanism has been reset, the pump will begin operating again, at which time you may let go of the lever.
Do You Need Experts to Fix Water Not Coming Out of Faucet?
If you’ve exhausted the solutions listed above and found yourself in a dreadful situation, it’s probably time to call the professionals. Water may not also come from the tap due to second-rate installation. In this case, you may need to follow exact instructions with the right tools, and it’s really a hard job.
Definitely, a pro plumber can be a great assistance to decide whether switching to a different type of pipe or a new faucet is best. Moreover, by contacting an expert, you secure an efficient and quick solution for the long term. Also, you don’t have to go through all the troubles to fix this issue.
FAQs Related to Water Not Coming Out of Faucet
Q. Can I Solve Water blockage Problem Alone?
The water shutoff valve, the blocked faucet cartridge, and the vapor lock on the spray nozzle are all problems that may be fixed without calling a plumber. Repairing the faucet is only a good idea, though, if you know for sure what the problem is. You should also check that you have the appropriate training and equipment.
Q. When Should We Call a Plumber for Faucet?
If you have plumbing problems like water not coming out of tap and can’t figure out the cause or a solution, you should definitely call a professional plumber. Significant issues, including airlock bubbles, water leaks, or blocked water pipelines, need the attention of a plumber.
Q. When I Turn on the Sink Faucet, Should Water Always Flow?
It is common knowledge that water should continually flow from your sink’s faucet. If water flow issues are preventing you from using your faucets, you must identify and fix the underlying reason without delay.
Q. How to Open a Blocked Tap?
It can be done simply by cleaning the end of the tap. You need to remove the aerator from the end of the faucet by moving it anticlockwise. Then, need to clean the deposits there. Also, disassemble to clean the parts. If needed, soak them in vinegar. Finally, reassemble the parts and aerator.
Q. Can a Bad Faucet Lead to Low Water Pressure?
Low water pressure means there is some blockage on the way of coming water. So, there might be deposits and debris at the aerator, and need to remove them. Therefore, no need to change faucet.
When no water comes out of your faucet, there is no need to freak out. As you can see, there are many reasons why water flow may become restricted. You will need to locate the cause of the issue and target it before the water can once again begin to flow freely from the faucets in your home.
If despite following our recommendations, you are still unable to determine what caused the issue, your best bet is to get in touch with some qualified plumbers in your area.