Most bidet users, especially starters, are concerned about a bidet and how to clean each part. I understand that bidet lovers maintain a high level of hygiene, paying attention to how they wash their hands and the household appliances they use daily. As a bidet, it will not clean itself; You have to return the hand. Should it be poorly maintained, it will malfunction anytime. You must make a cleaning plan permanent.
How to clean a bidet is similar to cleaning a shower head. Be it hand-held nozzles, electric bidets, or standalone. All of these can be easily cleaned with vinegar or mild detergent. Bleach and some abrasive powders should be avoided as a general rule. They can degrade rubber O-rings or rivets, causing internal leaks. Also, electric bidets should not be submerged in water as they pose a risk of shock or malfunction.
Let’s see some general guidelines first.
General Guidance and Terms
- For Cleaning & Deodorization
If you want to clean up some light soil from a hard surface of a bidet, take one part of the cleaning solution and seven parts of water. Spray that into the stain and wipe it out.
- Disinfection & Cleaning
Spray the solution into that area until it is fully covered. Leave that solution for at least 10 mins to penetrate and remain wet. If you give enough time, there is no need to scrub at all. Wipe it off with a mop, sponge, or clean clothes. This product will not leave soap scum or grit when used or left for a certain period. In case of a heavy stain, try to lighten the color before applying it to disinfect the treatment.
- Bactericidal Activity
When used as directed, this product exhibits effective bactericidal activity against organisms. Those are Staphylococcus aureus-Methicillin Resistant (MRSA), Staphylococcus aureus, Pseudomonas aeruginosa, Salmonella choleraesuis, Enterococcus faecalis-Vancomycin Resistant (VRE), Escherichia coli and Staphylococcus aureus-Glycopeptide Resistant (GRSA). The help of an efficiency test proved that it is an effective one-step cleaner-disinfectant in the presence of organic soil.
- Mold & Mildewstat
It can also be beneficial to prevent mold and mildew stat from hard and non-porous pre-cleaned inanimate bidet surfaces.
To prevent mold and mildew stat from the hard and non-porous pre-cleaned inanimate surfaces of bidets, spray the solution into the bidet and let it air dry fully. To get better results, repeat this process once a week or weekly to prevent mildew growth.
How to Clean a Bidet Properly?
Although the cleaning process is basically the same across all types of bidets, the process varies slightly depending on whether you own a bidet toilet, bidet toilet seat, or bidet attachment. Some bidets, for example, are powered by electricity, while others are not.
Fortunately, many of these same technological advances make cleaning your bidet seat and nozzle faster and easier than ever before. After all, these modern marvels of bathroom hygiene were designed to clean you, not the other way around. For a small amount of maintenance, you might find yourself engaging, we’ve got some quick and not-so-dirty tips to help keep both you and your bidet fresh, clean and happy.
1. Start With the Bidet Toilet Seat
If the bidet seat is powered, unplug it before cleaning. Wipe the top and bottom of the bidet seat, base, and other parts with a damp cloth and a mild cleaner such as vinegar or mild detergent. Depending on the bidet toilet seat, you may need to remove the entire thing to clean it.
Some have a quick-release button on the side, making removing the bidet seat easy and cleaning the area below it. You can clean it with your regular toilet cleaner, which is not plastic like your bidet seat.
Most bidet seat spray nozzles are fully retractable and self-cleaning, but you will need to clean your nozzles every so often to clean the bidet thoroughly.
It will also help to clean any remote controls and side panel controls that come with the bidet toilet seat using a disinfectant. A squeaky-clean bidet toilet seat is ready to clean your behind. Remember that your bidet seat will vary depending on the type of wash, so always check your handbook for proper recommendations.
2. Move to Cleaning of Nozzle
There are some modern electric bidet comes equipped with a self-cleaning nozzle. It helps to clean itself after every use. You can clean it on demand using the control panel. However, you may want to manually deep clean the nozzle.
To do this, press and hold the cleaning button for 3sec on the control panel. While the wand is extended (it will be out for 2 minutes), use a toothbrush or a soft cloth to clean the spray nozzle gently. After the time out, the spray nozzle will retreat automatically.
Note: It is essential to know that bidet toilet seat nozzles vary depending on the material and manufacturer’s brand and model. So please read the user manual to be 100% sure which products can and cannot be used for cleaning. For example, some brands have plastic nozzles, so some chemicals cannot be used in such cases.
If your bidet doesn’t have a self-cleaning option, you must clean it yourself. Try cleaning the nozzle thoroughly with vinegar and a brush. At least every 14 days, rinse other bidet nozzles. You must push the cleaning switch for five seconds until the nozzle advances to where it is accessible. Then, rinse the nozzle using a toothbrush and vinegar-water solution.
- If you have two nozzles in your budget, you need to clean both at different times by turning on the extension switch on each.
- If you want to remove the tip of a detachable nozzle, immerse it in vinegar. If the nozzle that releases the water has low pressure, they are probably blocked.
- Extend the nozzles using the cleaning lever, then disconnect the machine to prevent the nozzle from retracting while cleaning the tip. Gently twist or wiggle the nozzle tip to remove it.
- Scrub gently after soaking in vinegar for 2-4 hours using a toothbrush.
- Reconnect the unit after attaching the nozzle tip.
- If the tip of the nozzle is stuck and cannot be removed, remove it with vinegar in a Ziplock bag.
If the nozzle does not have a detachable tip, you need to extend it, unplug the device, and immerse it in a bag of vinegar. Make sure the end is wet, and tighten it using a rubber band. The tip must be cleaned with a toothbrush every 2-4 hours. After removing the bag, you can plug the unit back in.
Tips: When cleaning the nozzle, power must be connected for the nozzle to extend and retract.
How Do You Clean a Stained Bidet?
Add vinegar to the aperture of the bowl and soak overnight. Any water should be removed before placing a generous amount of white vinegar in the bidet bowl. Let the vinegar sit in the bidet overnight.
Vinegar-soaked toilet paper effectively removes stains around the rim of the bowl. Dip a tissue paper or towel in the vinegar and apply it to the edge of the bowl or any other stained area where the vinegar cannot reach directly. Make sure the towel or tissue paper sits there overnight.
To remove the remaining stainsby wipe the bidet with a clean cloth. Remove the toilet paper and scrape the inside of the bowl with a towel soaked in vinegar. Then wash the bowl with water. When necessary, repeat the same procedure.
How Often Should a Bidet Be Cleaned?
A very early question is how often I should clean my bidet. It depends on the type of bidet, how often the toilet is used per day, and your preference.
You can go for basic cleaning every day. For example, many bits come with self-cleaning features, which you can use for daily cleaning. However, for cleaning in detail, you can set a weekly routine where you do regular maintenance and cleaning.
Daily Cleaning Routine for Bidet You Can Follow:
- Use the wash feature of your bidet nozzle daily. Water runs over the nozzle to clean it.
- For light dust and dirt, use a soft, slightly damp cloth to wipe down seats and services you can reach without removing the bidet. You can also use a mild cleanser or the ammonia-free version. Some bidets have germ-resistant plastic, but you’ll still need to wipe down dirt daily.
- For heavy dirt, wipe with a soft, slightly damp cloth soaked in a diluted dish detergent with a neutral pH.
If you have a bidet with a control panel or remote, clean it by lightly dampening a cloth with a mild spray cleaner. Don’t submerge the remote or control in water or overspray with a cleaner.
What to Do Monthly:
- Remove the bidet and toilet lid and wipe with a soft, damp cloth and neutral kitchen dish soap. Allow them to dry, or wipe them with a soft dry cloth.
- If your bidet seat has a deodorizing filter, remove it and clean it with a toothbrush and water, then rinse and allow it to dry.
- Once all the components are dry, reinstall everything so you can clean the water nozzle. Even if your bidet seat has a nozzle wash feature, it’s still a good idea to clean it manually once a month.
When cleaning the nozzle, do not pull, push, or press the wand with excessive force, as this may cause damage or malfunction.
What to Do Semiannually:
- Some bidet seats have a filter near the inlet to help protect the contents from mineral deposits or buildup. Once you have turned off the water supply to the bidet, remove the filter and rinse it to eliminate any sediment, stains, or dust.
- If your bidet seat has a hose that connects to the water shut-off valve, clean the inside of the valve with a toothbrush to remove any sediment. Remember to turn off the water first.
Whatever type of toilet you have, the information in today’s article will be reliable and helpful. In the end, I want to conclude How To Clean A Bidet. If you usually flush your toilet with hard water, it may risk your bidet for long-term use. To avoid this situation, try to install a water filter between the hose and the seat semi-annually.
Still, First thing, do not try harsh chemicals when cleaning. Second, don’t try to move the unit after a few days; It may be damaged. It will stop being convenient for the bathroom experience you love. It is a matter of cleaning daily to see if dirt has accumulated and checking thoroughly every fortnight. And in the long run, you can avoid inconvenience from errors.