A toilet is an everyday used item in our household. In fact, it is more about necessity than a luxury. Keeping this household item clean and well-managed is essential. But sometimes, the toilet becomes a mess and headache for some users. Many of us experience waste coming back from the toilet after a flush.
Experts say clogged drain pipes, insufficient water tanks, and stuck objects mainly push back the waste in your toilet. It is shown that youngsters or adults tend to throw their toilet paper into the bowl. As a result, your commode became clogged and prevented removing the waste.
So timely maintenance is required for every toilet. This guide explains why waste comes backafter flushing the toilet, how to fix it, and care tips. So keep reading the troubleshooting guide.
Content
Why Does My Toilet Flushe but Waste Comes Back?
Generally, Every toilet connects to a drainage pipe or sewer line that removes waste. Broken or damaged, this part can restrict the elimination process and push back the wastes even after flush. If the problem isn’t fixed, your wastewater can return to your bathtub or shower. Below are the five Main reasons why waste comes back after a toilet flush.
1. Stuck Objects in Your Commode
Some users tend to use their toilet as a garbage can. Youngsters and adults also have these bad habits these days. You should know that continuous throwing of non-flushable items can block the sewer line in your toilet. Wipes, toilet paper, clothes, towels, ear swabs, hair, etc are those items we tend to put and flush our toilet.
But, you should understand these objects create a bigger drainage problem in our residentials. Many of these products are hard to break or eliminate through the sewer pipe.
2. Clogged Pipes
Most home toilets added an S or P-shaped pipe behind them. These traps prevent releasing the sewer gasses from the toilet bowl to your bathroom. Clogs in this area can restrict the drainage system and cause waste to come back. Plumbers always suggest cleaning these pipelines every two to three months. You should use a toilet auger to remove any stuck objects available in the area.
3. Blocked Plumbing Vents
Drainage pipes are just one line to deliver waste from the toilet. Plumbing vents also work to eliminate sewer gasses from your ceiling or roof. It works to prevent entering the odor in your building. Clog or blockage of plumbing vents can create flush problems in your toilet. So it’s better to inspect the area and determine any developed issues. If there is any debris, use a toilet auger to remove them.
4. Damaged Sewer Line
The sewer line connects to your toilet bottom and is located underground. It is a public pipeline that links every toilet in your area. However, due to its location, the sewer line is well protected from rain, snow, and heat. Still, the channel can be damaged by tree roots, rocks, and other debris.
The continued pressure of these materials can puncture the pipeline and cause back of waste in your toilet. Contact a plumber to fix the drainage issue if you find the problem in the sewer line.
5. Insufficient Water In the Tank
Low-flow toilets may be known to cut down your water bills. Sometimes, this feature can also cause flush issues in your commode. Insufficient water trouble to flush excessive wastes, toilet papers, and other non-flushable items from your bathroom.
As a result, water wastes come back again. However, good quality low-flow toilets last more than a decade. Still, the problem is familiar with these products. If your commode has the same issue, try to replace them.
Related Post: 10 Best Bidet Converter Kit Reviews 2023 [Buying Guide]
10 Methods to Fix Toilet Flushes but Waste Comes Back
If your toilet has any blockage issues, clean them by yourself. But if the problem is with damaged drainage pipes or sewer lines, contact a plumber. Until then, you should try these home remedies that quickly loosen any clog or dirt in your drainage lines. So keep reading the tips below.
1. Dishwashing Liquid and Hot Water
Did your toilet pipe clog with dirt, oil, and other organic materials? Stick in the pipeline and do not remove it? Try this remedy.
Take a large pot, pour eight glasses of water, put the tub in the oven, and heat it. Now add several spoonfuls of dishwashing liquid, and you are done. After That, slowly insert the mixture into your clog pipeline. The liquid will wet and break down oily and sticky dirt easily.
Note: Avoid using this remedy if your pipeline is made from PVC material.
2. Wire Coat Hanger
A wire coat hanger is also effective in pulling out sticky clogs and dirt. If you have one, use it or buy it from the hardware store. Keep the hook side at the bottom and insert it into the pipeline. Now give a particular push to the area and eliminate dirt as much as possible.
Note: Always wear gloves to protect your hands from dirt.
3. Vinegar, Salt, and Borax Mixture
This is another best home remedy to remove sticky dirt or clogs. So first boil a kettle of water and add 1/2 cup vinegar, 1/4 cup salt, and 1/4 cup Borax. Boil the mixture and pull it out from the oven for a specific time.
Now wear gloves and pour the mixture into the drainage pipe. After That, wait for an hour so the clog can wet and break down quickly. Now use a plastic stick to pull out additional dirt from the channel.
4. Baking Soda & Vinegara
Baking soda and vinegar also help to remove sticky dirt. So pour 1/2 cup baking soda and 1/2 cup vinegar into the drainage pipe. Wait for an hour until the mixture sits appropriately. Later you should rinse the channel using warm or tap water.
5. Salt and Baking Soda
Like the previous remedy, take a bowl and add half a cup of sodium bicarbonate and half a cup of salt. Now mix the items properly using a spoon. Put down the mixture into your drainage pipe and wait until it sits. After That, apply warm water to rinse the pipeline.
6. Baking Soda, Salt, and Tartar Cream
Try this mixture if you need a different solution. Take a big jar and add half a cup of baking powder, salt, and two tablespoons of cream of tartar. Now close the jar lid and shake it properly. After that, pull half a jar of solution into the drain and wait for hours to sit. Later, you should pour a kettle of warm water into the channel. Lastly, use tap water to remove excess dirt from the pipeline.
7. Lemon Juice With Baking Soda
Our final best and quick solution is lemon juice and baking soda. You can drop half a cup of soda and a few tablespoons of lemon juice into your drainage pipes. Wait an hour before cleaning the area with warm or tap water.
8. Plunger
If the clog or dirt is visible and not much down to the pipeline, use a plunger to pull them out. Put the large face on the hole and thrust with pressure to remove dirt or clog. However, the method is not very effective in many cases.
9. A Sewer Snake
Using a sewer snake effectively pulls out sticky clogs from the pipe. In fact you don’t need any plumber’s help to use this item. Visit a hardware store, and you can easily find different size sewer snakes. Try to buy a flat tape snake if the pipe diameter is under two inches. Still, when the clog is more stubborn, apply a sewer snake attached to a motor.
10. Hydro-jetting Method
Most plumbers use hydro jetting to remove sticky clogs underneath the sewer pipe. These devices throw 4,000 PSI of water toward the debris stuck in the channel. The process may take specific expertise to perform safely. So contact a plumber if no troubleshooting steps work in your favor.
Conclusion
Hope this article helped you to resove the issue of Toilet Flushes But Waste Comes Back. Remember, clog, dirt, debris, tree roost, and other non-flushable objects mainly cause the problem. However, it is common to build up such a mess with years of use. You should clean your drainage system every two to three months. So you never face such issues with your toilet.
Recommended Posts:
