You’ve just loaded your Samsung dishwasher and turned it on then an odd error code OC appeals. You might find yourself scratching your head and wondering what it means and how to fix it. Fortunately, this is a typical mistake that can be easily fixed by following a few straightforward steps.
On a Samsung dishwasher, the OC error code typically denotes a drainage problem. A clogged drain hose or a malfunctioning drain pump may be to blame for this. Check the drain connection and drain hose at the sink for obstructions or clogs before attempting to fix the problem. To clear any debris that might be obstructing the drainage system, clean the drain pump and filter next.
In this article, we’ll go deeper into the causes of the samsung dishwasher oc code error and the solutions you can try. To make it simple for you to follow along and solve the problem on your own, we’ll give you detailed instructions that are short and to the point, using simple language and active voice.
What is the Samsung Dishwasher OC Code Error?
On the control panel of a few Samsung dishwashers, there is an error message known as the OC code. “Over-Level Water Error,” the name of this error code, denotes too much water in the dishwasher’s tub. Several potential causes exist, including a broken water inlet valve, a clogged drain hose, or a broken water level sensor.
The dishwasher cannot operate until the water level problem is fixed, according to the OC code, which shows up on the display. You can try some troubleshooting techniques to solve the issue, like inspecting the water supply and drain hoses for obstructions or kinks, ensuring the water supply valve is fully open, and cleaning the water level sensor. You should call a qualified technician to diagnose and fix the problem if the above steps don’t resolve it.
The Samsung dishwasher OC code is a warning signal that denotes a water level issue in the dishwasher, to sum up. It is critical to address this problem immediately to stop the appliance from suffering additional harm and guarantee that it continues to operate correctly, it is essential to address this problem immediately.
How to Fix the Samsung Dishwasher OC Error Code?
Don’t freak out if you see the Samsung dishwasher OC error code. According to this error code, the dishwasher can only function once the problem is fixed, which denotes excessive water in the dishwasher tub. However, you can solve this issue by following a few straightforward steps.
1. Inspect the Drain Connection and Drain Hose at the Sink
It’s crucial to check the drain connection and drain hose at the sink when attempting to repair the Samsung dishwasher OC error code. A blocked or clogged drain may occasionally result in water backing into the dishwasher and setting off the error code.
Before doing anything else:
- Shut off the dishwasher and disconnect the drain hose from the sink’s drain connection.
- Check the link and the hose for any indications of debris or blockage.
- Clear it out with a soft brush or cloth if you find any.
The drain hose should then be checked to ensure it is not twisted or kinked during installation. If it is, adjust it so that the water can flow properly. If the problem persists, reconnect the hose to the drain connection and start the dishwasher to check.
You can fix the Samsung dishwasher OC error code and save money by checking the drain connection and drain hose at the sink.
Related Post: Samsung Dishwasher Not Draining? Things to Fix Now
2. Clean the Drain Pump
Cleaning the drain pump is another option for resolving the Samsung dishwasher OC error code. Water can back up into the dishwasher due to a blocked or clogged pump, resulting in the error code.
Please turn off the dishwasher and unplug it from the power source before cleaning the drain pump. Find the drain pump, typically at the dishwasher’s base, and clear any debris or obstructions out of it.
After clearing away any obvious debris, you should flush the drain pump with water to ensure no obstructions. If the error code still appears, reconnect the dishwasher to the power source and turn it on again.
Cleaning the drain pump is an easy and efficient way to resolve the Samsung dishwasher OC error code and prevent further drainage system problems.
3. Clean the Filter
Cleaning the dishwasher’s filter is another potential fix for the Samsung dishwasher OC error code. Water can back up into the dishwasher because of a clogged or dirty filter, setting off the error code. How to clean the filter is as follows:
- Shut off the dishwasher and look for the filter, typically near the bottom.
- Discard any debris or food particles by removing the filter from its housing and thoroughly washing it under running water.
- Rub any tenacious dirt or grime from the filter with a gentle brush or cloth.
- Look for obstructions or debris in the filter housing, and remove them if found.
- Check if the error code has been fixed by replacing the filter in its housing and turning on the dishwasher.
To resolve the Samsung dishwasher OC error code and keep your dishwasher operating correctly, clean the dishwasher’s filter. To avoid any potential issues with your dishwasher in the future, it’s a good idea to clean the filter frequently.
4. Clean the Sump
Another potential fix for the Samsung dishwasher OC error code is to clean the sump. Water can back into the dishwasher if the sump, which is the area beneath the dishwasher’s filter, becomes clogged with food particles or other debris. How to clean the sump is as follows:
- To access the sump area, turn off the dishwasher and remove the lower dish rack.
- Clean the sump and surrounding area of trash or food residue using a soft brush or cloth.
- Look for any damage or cracks in the sump that might need professional repair.
- To check if the error code has been fixed, reinstall the lower dish rack and start the dishwasher.
To resolve the Samsung dishwasher OC error code and guarantee that your dishwasher operates appropriately and effectively, clean the sump. Cleaning the sump and its surroundings regularly will also help avoid any potential drainage problems.
5. Check for Sensor Issue
If none of those mentioned above fixes for the Samsung dishwasher OC error code have worked, a sensor problem might exist. The sensor, which gauges the dishwasher’s water level, may need to be replaced if malfunctioning. How to look for a sensor problem is as follows:
- Unplug the dishwasher from the power source and turn it off.
- Discover where the sensor is, typically at the dishwasher’s base.
- Inspect the sensor for any wear and tear or damage that may necessitate replacement.
- Check the continuity of the sensor with a multimeter to ensure it’s working correctly.
- If the sensor is defective, swap it for a new one and reconnect the dishwasher to the power source.
Leave checking for sensor issues to a qualified technician who requires some technical knowledge. However, checking the sensor’s continuity can be a useful diagnostic tool to pinpoint the root of the Samsung dishwasher OC error code if you’re comfortable working with electrical parts.
What Are the Standard Samsung Dishwasher Error Codes?
Samsung dishwashers are built to be dependable and effective, but just like any other appliance, they occasionally run into problems. Searching for error codes displayed on the control panel is one method of troubleshooting issues with your Samsung dishwasher. The following are some typical Samsung dishwasher error codes that you might see:
1. 5E
The drain system is frequently the source of the 5E error code on Samsung dishwashers. A clogged drain hose, a blocked air gap, or a broken drain pump could all be to blame for the dishwasher’s improper drainage.
HOW TO FIX:
Start by looking for any obstructions in the drain hose and air gap before resolving this problem. Eliminate any buildup or debris that might be impeding proper water drainage. If that doesn’t fix the issue, look for any signs of wear and tear or damage on the drain pump. If the drain pump malfunctions, replace it. Run a cleaning cycle with a dishwasher cleaner to clear the system of any last-minute buildup or debris. You can ensure that your Samsung dishwasher is operating correctly by using these steps to resolve the 5E error code.
2. OE
In most cases, a Samsung dishwasher’s OE error code denotes a problem with the water level sensor. It indicates that the dishwasher is not accurately detecting the water level, which could result from a blocked water inlet valve or a malfunctioning water level sensor.
HOW TO FIX:
To resolve this problem:
- Ensure the water inlet valve is clean and in good condition.
- If the valve is working correctly, use a multimeter to test the water level sensor to see if it is malfunctioning.
- Swap out the damaged sensor for a new one to solve the issue.
To ensure that the water is distributed evenly and that the sensor can precisely detect the water level, ensure that the dishwasher is also levelled. These instructions will help you fix the OE error code on your Samsung dishwasher and ensure it is operating correctly.
3. LE
On a Samsung dishwasher, the LE error code typically denotes a system leak. More specifically, it indicates a problem with the door seal or water inlet valve or that the dishwasher is sensing water outside of the tub.
HOW TO FIX:
To resolve this problem:
- Ensure the door seal is in good condition and not bent or out of alignment.
- Check the water inlet valve for leaks or damage if the seal is sound.
- Replace the defective valve with a new one.
- Check the dishwasher tub for cracks or other damage as well.
It might be best to call a qualified technician for assistance if you cannot locate the leak’s source. These instructions will help you repair the LE error code on your Samsung dishwasher and stop any additional leaks or system damage.
4. HE
The heating system is usually the cause of the HE error code on a Samsung dishwasher. It specifically means that, due to a broken heating element or temperature sensor, the dishwasher is not reaching the proper temperature during the wash or drying cycles.
HOW TO FIX:
Start by inspecting the heating element to ensure it is not corrupted or damaged before attempting to resolve the problem. If the component is working correctly, use a multimeter to test the temperature sensor to see if it is malfunctioning. Swap out the damaged sensor for a new one to solve the issue. Check the heating system’s wiring and connections to ensure they are secure and undamaged. You can ensure that your Samsung dishwasher is heating up correctly during the wash and dry cycles by using the steps listed below to fix the HE error code.
5. 4E
On a Samsung dishwasher, the 4E error code typically denotes a water supply issue. A clogged water inlet valve, a broken water supply line, or a broken water level sensor could all be to blame for the dishwasher not detecting enough water or having insufficient water pressure.
HOW TO FIX:
To resolve this problem:
- Ensure the water inlet valve is clean and in good condition. If the valve is functioning correctly, check for any kinks or damage to the water supply line.
- Check the water level sensor to ensure it’s not broken or obstructed.
- Replace the defective sensor with a new one.
These instructions will help you fix the Samsung dishwasher’s 4E error code and ensure it has enough water to wash your dishes.
Conclusion:
In summary, the Samsung dishwasher OC error code is a common problem that is easily resolved by following a few straightforward steps. You can fix the problem and get your dishwasher back to working properly by checking the drain connection and hose, cleaning the drain pump and filter, and looking for any sensor problems. With the help of this guide, you can successfully resolve the OC error code and maintain the proper operation of your Samsung dishwasher.
You May Also Like:
