Samsung dishwashers have a good reputation for their innovative features and advanced technology. Users love the convenience and hustle-free dishwashing mechanism in these devices. Still, many users complain their Samsung dishwasher is not draining in its regular form. Indeed, this is a common problem for many old dishwashers or poorly maintained devices.
Clog drain hoses and filters mainly cause Draining issues in samsung dishwashers. Over time food particles and other unwanted content get stuck inside these mechanisms. The following units became blocked at a certain point and faced trouble passing additional debris. That’s why experts suggest timely cleaning the hose, filter and other components.
However, the block hose and filter are not the only reasons for the Samsung dishwasher’s draining issues. Other conditions like Drain Pump Failure, Air Gap Issues, Garbage Disposal errors, loose Dishwasher Door Seal, faulty valves etc, can also cause the following problem.
So it’s important to understand common reasons for developing draining issues in Samsung dishwashers. That’s how you can easily fix the problem according to your device error. Keep Reading this troubleshooting guide and resolve the problem at home.
What Indicates the Samsung Dishwasher Draining Issue?
Before we jump to the causes, first understand common light error codes during Samsung dishwasher draining issues. Certain Samsung dishwasher units flash LEDs in specific letters and numbers. So the following are 5C SC, 5E SE OC, or 0C light flashing. Each type ensures there is a drainage issue in the machine. For example,
5C or 5E means a clog inside the hose line or filter. So the dishwasher is facing a draining issue when it’s working.
OC or OE means the dishwasher fills with excess water and has trouble draining debris from its hose line. In this case, you should check the pipeline, filter and sink connection.
What Causes the Samsung Dishwasher Not Draining?
Before starting the troubleshooting guide, you should understand what causes samsung dishwashers not to drain. In short, Samsung dishwashers work similarly to other related machines. The device is a water-spraying hose that shoots water into the dishes. After removing the food and dust particles, wastewater is delivered to the filtration and eliminated from the drain hose. Any blockage in the following units can cause draining issues in Samsung dishwashers. Below is a detailed explanation of the occasion.
Clog Drain Hose
The first problem is clog drain hose that restricts waste removal. This is a common problem that most dishwashers face at a certain point. The drain hose is located at the bottom of the machine and connected to the home drain system. This pipeline allows wastewater to flow from the machine to the drain. Over time, the channel became clogged due to food particles and dust build-up. As a result, water doesn’t flow correctly, and drainage issues occur in Samsung dishwashers.
Faulty Water Valve
A dishwasher valve is a water inlet valve that ensures water flows in one direction. In most cases, clog or blockage creates the issue and makes it difficult to open or close the valve. Remember, a faulty valve can cause backflow of water waste to the machine. If the unit is not open on time, waste can be stuck in the machine and cause draining issues. The water valve is located at the bottom of the machinebehind a rectangular “toe kick” panel. If this is the problem in your case, either you clean the unit or go for replacement.
Proper Connection between dishwasher and sink is important to prevent drainage issues. Remember, the drain hose is connected to the air gap or sink’s drain system. An air gap is a unit mounted on the sink’s countertop. This component prevents the backflow of water waste to the machine. The absence of this unit can make draining difficult for the dishwasher. So you should ensure the hose is connected to the sink’s drain system and has a high loop air gap.
Error in Drain Pump
The dishwasher’s drain pump is a vital electrical unit. This component rotates a washer impeller that pulls wastewater and delivers it through the sewer line. Error or blockage in this unit can cause slow draining or stop the function. You can ensure the fault by ensuring a gurgling sound in your dishwasher. The problem may be electrical or mechanical, depending on your machine. Still, a faulty drain pump develops after years of use or excessive wear and tear.
Water Waste contains several food particles, dust, debris and other content. If the water flows with these compounds, there is a chance of creating blockage. Here comes a filter that separates the content from the water. As a result, wastewater can flow through the sewer line. Over time, this unit also builds up clogs or blockages and causes draining issues in the dishwasher. That’s why it’s important to clean the filter on time.
Blockage in the Garbage Disposal
Not all models contain filters to separate food chunks. Some Samsung dishwashers include garbage disposal for the tasks. This unit also works similarly to absorb wastes from the water. It helps to prevent getting a waste pool inside your machine. Over time, garbage disposal also builds blockageor clogs inside. So it’s recommended to clean this unit to prevent drainage issues.
How to Fix The Samsung Dishwashers Not Draining?
Now we come to the vital part, how you can fix a Samsung dishwasher that is not draining. First, we unclog units that mainly cause the problem. It means washing the drain hose, filter, garbage disposal and others.
Additionally, we impact key components in the dishwasher like the drain pump, air gap, sink connection and others. So drop down to get a detailed answer.
1. Run an Empty Wash Cycle
The solution may look minor to you, but it helps. Sometimes leftover detergent, food chunks or debris can slow down the draining process in the dishwasher. In this case, running an empty wash cycle may help to clean up the space and make waste removal work easier.
So first, ensure the washer is empty and no dishes or plates are available. Secondly, select a low-temperature setting or set a shorter wash cycle mode. Now start the wash and let the machine clean automatically. The process will remove leftover debris from the drum and make the draining process regular.
2. Unclog Drain Hose
As mentioned, a clogged drain hose mainly causes the blockage issue in the dishwasher. So it’s vital to inspect the unit in the very first step.
This drain hose or sewer line is located at the bottom of the machine and easily pulled off by rotating. So remove the hose and follow simple steps to remove the clog.
First, take a towel and catch all leftover waste from the machine. In the second step, bring a few tablespoons of baking soda and directly throw it into the pipe.
Let the powder sit for 15 minutes, later, you can wash the unit using fresh water. You can also use a plumbing snake or metal hanger to remove sticky clogs from the pipe.
However, you should be careful because too much force can damage the unit.
Now carefully reinstall the drain hose to the dishwasher and run an empty wash cycle.
3. Clean or Replace the Filter
A filter is vital in separating food chunks and other particles from the wastewater. This unit more commonly builds up clogs over time. That’s why experts suggest cleaning this unit once every month.
The dishwasher filter is mainly located at the bottom of the machine, just below the bottom rack. You can easily pull out the unit by unscrewing and rotating it.
After removing the filter, add water and a few tablespoons of dishwashing liquid to a small tub. Now put the component into the solution and leave it for 15 minutes.
The cleaning solution will break down the clogs and make removing debris from the filter easier. Later you can rub the filter using a brush and remove leftover clogs. Lastly, wash the filter and reinstall the unit in its previous position.
However, in many cases, dishwasher filters need replacement instead of cleaning. Remember, dishwasher filters should be changed every three to six months.
4. Inspect the Drain Solenoid or Air Gap.
Drain Solenoid or air gap is a small cylindrical unit that maintains water flow in the dishwasher. This component opens or closes the water inlet valve according to the demand.
This unit develops blockage or mechanical error over time due to excessive wear and tear. On this occasion, you have to inspect the component manually. This unit is located inside the machine just above the drain pump. So it’s hard to reach the location without hustle.
Still, you can use a long bottle brush or a cardboard tube to remove dust from the unit. You can also use a torch to inspect the area or call a plumber for help.
5. Inspect the Water Inlet Valve.
Valves also prevent the backflow of water waste to your machine. This unit is located at the bottom of the dishwasher. A clog or blockage in this area can restrict the opening or closing mechanism in the water inlet valve.
So manually inspect the area and remove any available debris from there. Indeed you should replace the unit, as the valve is not very expensive.
6. Check the Drain Pump.
The drain pump is a key component that carries down water waste from the machine. Clog or blockage in this area is also common for old dishwashers. However, this unit is free from wear and tear.
Additionally, a drain pump has an average lifespan of 10-12 years. If this component gets damaged or stops working, you must call a professional for help.
7. Verify the Garbage Disposal.
Garbage disposal more commonly develops clogs or blockages due to the collection of food chunks. Timely maintenance is required to run this unit correctly. However, washing the garbage disposal is much easier for you.
First, take a bowl and add a few tablespoons of vinegar and baking soda. Now mix the solution properly and pour it into the garbage disposal. Let the solution sit for at least 15 minutes, and rinse off using warm water. The process will break down any clog or blockage inside the unit.
Do I Need Expert Help?
The draining issue in Samsung dishwashers is common with age. You can easily fix the problem by following our above steps. Still, in some cases, you may have to contact professionals. If the pump motor gets damaged or stops working, a clog or blockage develops deep inside the drainage system.
Dishwasher sensors stop working etc. If the following is the issue with your device, professional help is the best option for you. Still, if the problem is minor and there is a mechanical error, our above steps are enough to resolve your challenges.
FAQs Related to Samsung Dishwasher Not Draining?
Why is My Dishwasher Not Draining but With No Clogs?
If the dishwasher has no clog or blockage but is still facing draining issues, there may be a more complex problem. A faulty motor or broken inlet valve can restrict the elimination of water waste.
Why is There Water in the Bottom of My Samsung Dishwasher?
The dishwasher connects to a drain hose that passes water waste from the machine to your drainage system. If the pipeline placement is incorrect, water starts filling the bottom of your dishwasher.
How Do I Run the Drain Cycle on My Samsung Washer?
The Samsung dishwasher has a drain cycle to remove leftover water from the machine. To enable the feature, press the water jet button, wait a while, and press stop. Secondly, click the power button and run an empty wash cycle to drain the waste.
So above is a detailed guide about what causes Samsung dishwashers not to drain and how to fix it quickly. We hope you get detailed answers to your query. Remember, a clogged drain and hose filter mainly develops dishwasher issues. Some other causes, like faulty drain pumps, inlet valves, air gaps and clogged garbage disposal, are also available. You should inspect each occasion and fix the problem according to our steps.
You May Also Like